In this letter, an approach for designing a tunable and steerable antenna is presented. The antenna model is based on a wideband bow-tie radiating element mounted above an active artificial magnetic conductor (AMC). The AMC geometry consists of a frequency selective surface (FSS) printed on a thin grounded dielectric slab in which some chip-set varactor diodes are placed between the metallic elements and the backing plane through vias. The resulting antenna can be tuned over the S-Band by simply changing all varactor capacitances through an appropriate biasing voltage. Moreover, this structure can operate a beam scanning over each working frequency by applying an appropriate biasing voltage to the active elements of the AMC surface in accordance to leaky radiation principles. The low-profile active antenna is characterized by an overall thickness of 5.32 mm, which corresponds to approximately /24 at the center of the operating band.

An Active High Impedance Surface for Low Profile Tunable and Steerable Antennas

COSTA, FILIPPO;MONORCHIO, AGOSTINO;
2008-01-01

Abstract

In this letter, an approach for designing a tunable and steerable antenna is presented. The antenna model is based on a wideband bow-tie radiating element mounted above an active artificial magnetic conductor (AMC). The AMC geometry consists of a frequency selective surface (FSS) printed on a thin grounded dielectric slab in which some chip-set varactor diodes are placed between the metallic elements and the backing plane through vias. The resulting antenna can be tuned over the S-Band by simply changing all varactor capacitances through an appropriate biasing voltage. Moreover, this structure can operate a beam scanning over each working frequency by applying an appropriate biasing voltage to the active elements of the AMC surface in accordance to leaky radiation principles. The low-profile active antenna is characterized by an overall thickness of 5.32 mm, which corresponds to approximately /24 at the center of the operating band.
2008
Costa, Filippo; Monorchio, Agostino; S., Talarico; M. F., Valeri
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11568/119170
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 101
  • ???jsp.display-item.citation.isi??? 82
social impact