Plunge pool scour is an important topic in hydraulic structures design. Numerous studies have been done in past years to understand the scour phenomenon due to plunging jets. These studies finally aimed at reducing the risk of structural undermining and collapse. Scour holes created under various hydraulic and geometrical conditions were analyzed for both two-dimensional and three-dimensional cases, and methods to reduce the scour were also investigated. In the current study, an attempt was made to quantify the feasibility of using crossing jets. The scour process was analyzed, and various relationships were presented to predict the main geometrical parameters, i.e., maximum scour hole depth, scour hole length, and scour hole width. Scour profiles were also compared with those due to an equivalent single jet. The main parameters on which the scour geometry depends were found as the densimetric Froude number of the jet, the crossing angle between the jets, the distance between the crossing point and the water surface level, and the water depth. All experiments have been carried out for a fixed vertical angle of 45 degrees.

Scour due to Crossing Jets at Fixed Vertical Angle

PAGLIARA, STEFANO;PALERMO, MICHELE
2011-01-01

Abstract

Plunge pool scour is an important topic in hydraulic structures design. Numerous studies have been done in past years to understand the scour phenomenon due to plunging jets. These studies finally aimed at reducing the risk of structural undermining and collapse. Scour holes created under various hydraulic and geometrical conditions were analyzed for both two-dimensional and three-dimensional cases, and methods to reduce the scour were also investigated. In the current study, an attempt was made to quantify the feasibility of using crossing jets. The scour process was analyzed, and various relationships were presented to predict the main geometrical parameters, i.e., maximum scour hole depth, scour hole length, and scour hole width. Scour profiles were also compared with those due to an equivalent single jet. The main parameters on which the scour geometry depends were found as the densimetric Froude number of the jet, the crossing angle between the jets, the distance between the crossing point and the water surface level, and the water depth. All experiments have been carried out for a fixed vertical angle of 45 degrees.
2011
Pagliara, Stefano; Roy, D; Palermo, Michele
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11568/146061
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 7
  • ???jsp.display-item.citation.isi??? 6
social impact