The experimental facility IELLLO was installed in ENEA Brasimone R.C. in 2007, aiming to support the design of liquid Test Blanket Modules that will be installed in ITER and to contribute to the development of Lead-Lithium Eutectic (LLE) technologies. IELLLO has been recently upgraded by installing instrumentation relevant for ITER application. Differential pressure transducers, a Coriolis and a thermal mass flow meters were installed in the facility. An experimental campaign was planned, setting two objectives. The first objective was to qualify the instrumentation for flowing LLE The installation of a differential pressure transducer across each flow meter made also possible to characterize the pressure drops across these instruments. The second objective of this activity was to improve the knowledge on the performances of the main components of the loop at lower mass flow rates (namely 0.5-1.2 kg/s) and to quantify their pressure drops. The investigated flow rates were chosen to be relevant for the LLE loop of the WCLL TBS (Water Cooled Lead-Lithium Test Blanket System). This work presents the results of the experimental campaign, paying particular attention to underline the lessons learned on how to correctly operate instrumentation for LLE.

Experimental Qualification of New Instrumentation for Lead-Lithium Eutectic in IELLLO Facility

Venturini A.
Writing – Review & Editing
;
Utili M.
Writing – Review & Editing
;
Forgione N.
Writing – Review & Editing
2020-01-01

Abstract

The experimental facility IELLLO was installed in ENEA Brasimone R.C. in 2007, aiming to support the design of liquid Test Blanket Modules that will be installed in ITER and to contribute to the development of Lead-Lithium Eutectic (LLE) technologies. IELLLO has been recently upgraded by installing instrumentation relevant for ITER application. Differential pressure transducers, a Coriolis and a thermal mass flow meters were installed in the facility. An experimental campaign was planned, setting two objectives. The first objective was to qualify the instrumentation for flowing LLE The installation of a differential pressure transducer across each flow meter made also possible to characterize the pressure drops across these instruments. The second objective of this activity was to improve the knowledge on the performances of the main components of the loop at lower mass flow rates (namely 0.5-1.2 kg/s) and to quantify their pressure drops. The investigated flow rates were chosen to be relevant for the LLE loop of the WCLL TBS (Water Cooled Lead-Lithium Test Blanket System). This work presents the results of the experimental campaign, paying particular attention to underline the lessons learned on how to correctly operate instrumentation for LLE.
2020
Venturini, A.; Papa, F.; Utili, M.; Forgione, N.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11568/1042130
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 12
  • ???jsp.display-item.citation.isi??? 12
social impact