Design and Characterization of 10 Gb/s and 1 Grad TID-Tolerant Optical Modulator Driver

This paper presents the design and the experimental characterization of a 10 Gb/s electronic driver for silicon Mach-Zehnder modulators (MZMs). This driver is able to operate in harsh environments characterized by radiation levels up to 1 Grad(SiO2) total ionizing dose (TID). To compensate for the detrimental effects that radiation produces on the target 65 nm bulk silicon technology both device- and circuit-level radiation hardened by design (RHBD) techniques are developed and implemented. Extreme TID levels are faced using long-channel transistors with enclosed layout, avoiding the use of p-MOSFETs, and implementing a differential self-biased cascode architecture with common-mode feedback. Band-widening techniques, e.g., inductive peaking, cross-coupled capacitors, and buffer chaining, have been used to improve the driver's frequency response and reach the targeted data rate. Electrical measurements show 10 Gb/s waveforms with an eye diagram amplitude suitable for MZM driving. Electro-optical measurements performed connecting the electronic driver to a silicon photonic MZM confirm the achievement of a 10 Gb/s system-level operability. The radiation hardness of the driver is verified by exposing the integrated circuit to X-rays. The measurements confirm the ability of the driver to work up to 1 Grad with an eye amplitude reduction of only 10% and a 7% increment in the rise and fall times, validating the effectiveness of the implemented RHBD techniques.