Operating integrated circuits at minimal supply voltage and power levels has become a crucial challenge to support the development of energy-harvested smart sensing devices. In this work, building upon a single-branch 3-transistor voltage reference (VR) presented in a previous publication, we propose a novel NMOS-only 4-transistor VR, combining a self-cascode technique with high-frequency power-supply rejection (PSR) optimization by means of a strategically placed decoupling pseudo-resistor. Post-layout simulations of a 0.18-& micro; m CMOS design highlighted low-supply compliance and strong robustness to process-voltage-temperature variations. Specifically, the output voltage of 177 mV exhibits line sensitivity equal to 54 ppm/V in the 0.4-1.8 V supply range, while DC value of the PSR lower than -40 dB is achieved down to 0.28-V supply. Simulated current consumption is equal to 223 pA, while the mean temperature coefficient is equal to 24.44 ppm/degrees C from -20 degrees C to 80 degrees C. A compact area footprint of only 115.2 & micro; m(2) is also attained. These results highlight potentialities of the proposed topology for implementations of stable low-voltage and low-power VRs.
Ultralow-Voltage NMOS-Only Voltage Reference With High-Frequency PSR Optimization via Decoupling Pseudo-Resistor
Gagliardi F.
;Bruschi P.;Piotto M.;Sakouhi S.;Dei M.
2026-01-01
Abstract
Operating integrated circuits at minimal supply voltage and power levels has become a crucial challenge to support the development of energy-harvested smart sensing devices. In this work, building upon a single-branch 3-transistor voltage reference (VR) presented in a previous publication, we propose a novel NMOS-only 4-transistor VR, combining a self-cascode technique with high-frequency power-supply rejection (PSR) optimization by means of a strategically placed decoupling pseudo-resistor. Post-layout simulations of a 0.18-& micro; m CMOS design highlighted low-supply compliance and strong robustness to process-voltage-temperature variations. Specifically, the output voltage of 177 mV exhibits line sensitivity equal to 54 ppm/V in the 0.4-1.8 V supply range, while DC value of the PSR lower than -40 dB is achieved down to 0.28-V supply. Simulated current consumption is equal to 223 pA, while the mean temperature coefficient is equal to 24.44 ppm/degrees C from -20 degrees C to 80 degrees C. A compact area footprint of only 115.2 & micro; m(2) is also attained. These results highlight potentialities of the proposed topology for implementations of stable low-voltage and low-power VRs.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


