Purpose we predict SAR during MRI exam using a 7 T 1H 298 MHz eight-channel degenerate birdcage coil1 combining SAR simulations with subject-specific measured (RF) maps. Materials and Methods We simulated the coil1 in CST MW Suite, loaded by a model of human knee (Fig. 1, top). was calculated in an axial slice crossing the patella. The maximum local SAR for an Axial “Zero” Time-of-Echo (ZTE) sequence “SILENT”2 was calculated. We acquired maps of an adult (female) knee with a Bloch-Siegert sequence on 7 axial slices, centered on the same slice of the simulation, on a GE MR950 7T human system. For each slice a coefficient C, proportional to avg, was used to scale the SAR simulated3. Results Fig. 1 shows: bottom left, simulated magnitude; bottom center, local SAR for an input of 1 W per channel; bottom right, simulated magnitude for a FA = 90° (length = 3.2 ms) sinc-pulse in the slice previously chosen. Fig. 2 shows the subject-specific measured for a FA = 90° sinc-pulse. The predicted SAR obtained with scaled maps are 0.50 W/kg (global) and 3.68 W/kg (maximum). Conclusions we obtained a good agreement between simulated and measured in vivo maps, and we were able to calculate the distribution of SAR exposure, a safety MRI parameter not available in current exams, where only global SAR is provided, combining simulations and subject-specific measurements. Limits on global and local SAR (20 W/kg) were met for this sequence [1], [2], [3].
252. Prediction of subject-specific SAR distribution in MSK MR exam at 7 T
Gagliardi, V.;Tiberi, G.;Biagi, L.;Stara, R.;Aringhieri, G.;Tosetti, M.
2018-01-01
Abstract
Purpose we predict SAR during MRI exam using a 7 T 1H 298 MHz eight-channel degenerate birdcage coil1 combining SAR simulations with subject-specific measured (RF) maps. Materials and Methods We simulated the coil1 in CST MW Suite, loaded by a model of human knee (Fig. 1, top). was calculated in an axial slice crossing the patella. The maximum local SAR for an Axial “Zero” Time-of-Echo (ZTE) sequence “SILENT”2 was calculated. We acquired maps of an adult (female) knee with a Bloch-Siegert sequence on 7 axial slices, centered on the same slice of the simulation, on a GE MR950 7T human system. For each slice a coefficient C, proportional to avg, was used to scale the SAR simulated3. Results Fig. 1 shows: bottom left, simulated magnitude; bottom center, local SAR for an input of 1 W per channel; bottom right, simulated magnitude for a FA = 90° (length = 3.2 ms) sinc-pulse in the slice previously chosen. Fig. 2 shows the subject-specific measured for a FA = 90° sinc-pulse. The predicted SAR obtained with scaled maps are 0.50 W/kg (global) and 3.68 W/kg (maximum). Conclusions we obtained a good agreement between simulated and measured in vivo maps, and we were able to calculate the distribution of SAR exposure, a safety MRI parameter not available in current exams, where only global SAR is provided, combining simulations and subject-specific measurements. Limits on global and local SAR (20 W/kg) were met for this sequence [1], [2], [3].I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
