Formation of sodium-alginate droplets in an X-microdevice: Characterization of the pinching efficiency

Experiments and simulations are used jointly to gain a comprehensive insight into the pinching mechanism that generates alginate droplets in an X-microdevice operating in a hydrodynamic flow-focusing configuration. The X-microdevice is fed with an aqueous alginate solution into one inlet channel, while sunflower oil and Span80 are fed into the other two inlet channels. The use of the adaptive mesh refinement and volume of fluid method allows accurate tracking of the interface in numerical simulations. The sensitivities of numerical predictions to the contact angle and the surface tension are estimated through dedicated sets of simulations. Subsequently, numerical simulations and experiments are compared for different flow rates with a satisfactory agreement. We observe that the pinch-off mechanism may lead to the formation of several satellite drops in addition to the main droplet. A pinching performance indicator is suggested based on the amount of alginate that is encapsulated in the main droplet. The effect of operating conditions on the pinching efficiency, frequency, and droplet diameter is discussed to provide valuable information to optimize the droplets production. The pinching efficiency is closely related to the length and diameter of the liquid thread. At low flow rates, a short liquid thread is observed. This leads to the formation of few satellites and, thus, to high pinching efficiency but low droplet production. Increasing the dispersed-phase flow rate slightly reduces the efficiency but significantly increases the production.